California Takes TCE Exposure Limits to a New Low

On October 30, 2026, the California Occupational Safety and Health Standards Board (“Cal/OSHA Standards Board”) proposed amendments to California’s Permissible Exposure Limit (“PEL”) for trichloroethylene (“TCE”), a chemical commonly used as an industrial solvent. For companies operating in California, the proposed change would establish a TCE exposure limit substantially below both current California and federal OSHA standards. The proposal would reduce California’s existing eight-hour time-weighted average (“TWA”) workplace PEL from 25 parts per million (“ppm”) to 0.24 ppm, a more than 100-fold reduction. The proposed limit would also be more than 400 times lower than the federal OSHA limit of 100 ppm.

The Cal/OSHA Standards Board will hold a public hearing on December 17, 2026, with written comments due that same day.

Proposed Changes

The proposal would amend California Code of Regulations, Title 8, Section 5155, which establishes occupational exposure limits for airborne contaminants. In addition to lowering the eight-hour TWA PEL to 0.24 ppm (1.3 mg/m3), the proposal would eliminate the existing 15-minute short-term exposure limit of 100 ppm and ceiling limit of 300 ppm.

In its Initial Statement of Reasons, the Cal/OSHA Standards Board explains that the current California PEL, established in 1988, predates TCE’s recognition as a human carcinogen and does not adequately protect workers against cancer risks. Its risk assessment cites to anticipated decreases in cancer rates and other adverse health outcomes.

Interaction With EPA’s TCE Regulation

The proposal comes amid continuing federal regulatory developments involving TCE. In December 2024, EPA issued a final rule under the Toxic Substances Control Act (“TSCA”) prohibiting most uses of TCE, subject to specified phaseouts and exemptions. The rule also establishes interim workplace protections for certain covered uses, including an
eight-hour TWA Existing Chemical Exposure Limit of 0.2 ppm under EPA’s Workplace Chemical Protection Program, which is slightly more stringent than the Cal/OSHA Standards Board’s proposed PEL.

EPA’s rule remains subject to litigation and reconsideration. On October 14, 2026, EPA proposed extending certain TSCA compliance deadlines for specified TCE processing and manufacturing activities to December 31, 2027, while maintaining the underlying prohibitions and applicable interim workplace protections.

These developments highlight the impact that rulemaking in one arena often has in others, leading to increased overlap between occupational safety and environmental regulatory requirements. Employers using TCE should assess their obligations under both Cal/OSHA’s exposure standards and EPA’s TSCA requirements, as compliance with one does not necessarily satisfy compliance with the other.

What Employers Should Know

If adopted, the proposed California PEL could require employers using TCE to reassess employee exposures, evaluate existing engineering controls, and consider alternative chemicals or processes. The proposal may be particularly relevant to facilities involved in metal degreasing, chemical manufacturing, and other operations involving TCE.

Impacted employers should review the proposed rulemaking materials and consider submitting comments addressing the feasibility and potential impacts of the proposed limit. The Cal/OSHA Standards Board will hold its public hearing on December 17, 2026, at 10 a.m. Pacific Standard Time, with written comments due by 5 p.m. PST that day.

This post is as of the posting date stated above. Sidley Austin LLP assumes no duty to update this post or post about any subsequent developments having a bearing on this post.